The power wiring is buried under the transformer mount. It includes:
- Line filter
- 3 way terminal block
- Power switch
- Fuse
- Power Cord
Generally, the mains wiring was in good condition. It all had to be removed for painting, though.
The power cord was unsightly, and I replaced it with a new-ish power cord that included a modern moulded mains plug.
I added heatshrink over the high voltage transformer leads just in case the insulation had become brittle.
The DC wiring had a few nibbles that were covered with heatshrink. I missed one and applied liquid insulation tape to make do.
The capacitor was reformed using a bench supply.
Rust on the transformer was treated with deoxit and wire brush.
Voltages were checked initially at 24V and then at 240V.